The store will not work correctly when cookies are disabled.
Solid State Drives (SSD)
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB PCIe 3.0 NVMe M.2 80mm 3D TLC (ships as 256GB)
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.04
£24.20 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Data transmission |
|---|
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1500000 h |
| Certificates |
|---|
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| Design |
|---|
| Product colour | Black |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| Windows operating systems supported | Windows 10, Windows 8.1 |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Current | 2.5 A |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| ECC | Yes |
| Product colour | Black |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 22 mm |
| Weight | 10 g |
| Height | 2.3 mm |
| Depth | 80 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
Lite-On MU X M.2 128 GB PCI Express 3.0 NVMe 3D TLC
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Data transmission |
|---|
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1500000 h |
| Certificates |
|---|
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| Design |
|---|
| Product colour | Black |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| NVMe | Yes |
| NVMe version | 1.2 |
| NAND flash type | TLC (Triple Level Cell) |
| Sequential read speed (ATTO) | 1500 MB/s |
| Sequential write speed (ATTO) | 450 MB/s |
| SSD capacity | 128 GB |
| Windows operating systems supported | Windows 10, Windows 8.1 |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 110000 IOPS |
| Random read (4KB) | 91000 IOPS |
| Mean time between failures (MTBF) | 1500000 h |
| Certification | FCC, CE, BSMI, VCCI, KCC, EAC |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Current | 2.5 A |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| ECC | Yes |
| Product colour | Black |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Windows 10, Windows 8.1 |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Width | 22 mm |
| Weight | 10 g |
| Height | 2.3 mm |
| Depth | 80 mm |
| Packaging data |
|---|
| Package type | Blister |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Black |
£35.89
£29.91 In stock
-
![]()
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB PCIe 3.0 NVMe M.2 80mm
| Hard drive |
|---|
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 2100 MB/s |
| Write speed | 1900 MB/s |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Data transfer rate | 640 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 100 |
| Hot-swap | No |
| PCI Express interface data lanes | x4 |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 2100 MB/s |
| TRIM support | Yes |
| Write speed | 1900 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 102000 IOPS |
| Random read (4KB) | 179000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 640 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (average) | 3.03 W |
| Power consumption (max) | 3.22 W |
| Power consumption (write) | 3.22 W |
| Power consumption (read) | 2.84 W |
| Power consumption (idle) | 0.47 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 36576 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£29.04
£24.20 In stock
-
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| SSD form factor | M.2 |
| External DDR cache | No |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Weight & dimensions |
|---|
| Width | 80 mm |
| Height | 3.15 mm |
| Depth | 22 mm |
Innovation IT Performance M.2 128 GB PCI Express 3.0 3D TLC NVMe
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Performance |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | PCI Express 3.0 |
| Component for | PC/Laptop |
| NVMe | Yes |
| TBW rating | 60 |
| SSD capacity | 128 GB |
| Read speed | 1860 MB/s |
| Write speed | 600 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| SSD form factor | M.2 |
| External DDR cache | No |
| M.2 SSD size | 2280 (22 x 80 mm) |
| Technical details |
|---|
| Interface | PCI Express 3.0 |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Weight & dimensions |
|---|
| Width | 80 mm |
| Height | 3.15 mm |
| Depth | 22 mm |
£29.93
£24.94 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1775 MB/s |
| Write speed | 550 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Power |
|---|
| Power consumption (write) | 2.24 W |
| Power consumption (read) | 2.67 W |
| Power consumption (idle) | 0.49 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Native Command Queuing (NCQ) | Yes |
| Country of origin | China |
| SSD form factor | M.2 |
| Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Weight & dimensions |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Width | 65 mm |
| Weight | 40 g |
| Height | 9 mm |
| Depth | 120 mm |
| Packaging data |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Logistics data |
|---|
| Country of origin | China |
| Other features |
|---|
| Country of origin | China |
V7 V7SSD128GBNV3E internal solid state drive M.2 128 GB Serial ATA III NVMe 3D TLC
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Data transmission |
|---|
| Read speed | 1775 MB/s |
| Write speed | 550 MB/s |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Data transfer rate | 6 Gbit/s |
| Performance |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | Yes |
| DevSlp (device sleep) support | Yes |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1775 MB/s |
| TRIM support | Yes |
| Write speed | 550 MB/s |
| Memory type | 3D TLC |
| Random write (4KB) | 105000 IOPS |
| Random read (4KB) | 100000 IOPS |
| Native Command Queuing (NCQ) | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Power |
|---|
| Power consumption (write) | 2.24 W |
| Power consumption (read) | 2.67 W |
| Power consumption (idle) | 0.49 W |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Native Command Queuing (NCQ) | Yes |
| Country of origin | China |
| SSD form factor | M.2 |
| Sustainability certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA |
| Weight & dimensions |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Width | 65 mm |
| Weight | 40 g |
| Height | 9 mm |
| Depth | 120 mm |
| Packaging data |
|---|
| Package width | 65 mm |
| Package depth | 120 mm |
| Package height | 9 mm |
| Package weight | 40 g |
| Logistics data |
|---|
| Country of origin | China |
| Other features |
|---|
| Country of origin | China |
£21.92
£18.27 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1500 MB/s |
| TRIM support | Yes |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| Product colour | Blue |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 1500 MB/s |
| TRIM support | Yes |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Blue |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Blue |
Origin Storage SSD 128GB 3D TLC M.2 80mm SATA
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 1500 MB/s |
| TRIM support | Yes |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| Product colour | Blue |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 1500 MB/s |
| TRIM support | Yes |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| Product colour | Blue |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Product colour | Blue |
£20.94
£17.45 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Internal | Yes |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Internal | Yes |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Internal | Yes |
Origin Storage 128GB Stable Write Performance M.2 6GB/s 80mm
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Internal | Yes |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Data transfer rate | 6 Gbit/s |
| Design |
|---|
| Internal | Yes |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
| Other features |
|---|
| Internal | Yes |
£20.94
£17.45 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Weight | 7 g |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Pro Series 128GB M.2 (NGFF) 80mm SATA 3D TLC SSD
| Hard drive |
|---|
| SSD capacity | 128 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 128 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Weight | 7 g |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£20.94
£17.45 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Weight | 7 g |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage Inception TLC830 Series 120GB M.2 (NGFF) 80mm SATA 3D TLC SSD
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Access time | 0.2 ms |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| Compatible products | Universal |
| Data transmission |
|---|
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Data transfer rate | 6 Gbit/s |
| Endurance |
|---|
| Mean time between failures (MTBF) | 1000000 h |
| Design |
|---|
| Component for | PC/Laptop |
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| Component for | PC/Laptop |
| NVMe | No |
| Low-density parity-check (LDPC) | Yes |
| TBW rating | 50 |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 56320 IOPS |
| Random read (4KB) | 53760 IOPS |
| Mean time between failures (MTBF) | 1000000 h |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.2 ms |
| SSD form factor | M.2 |
| Compatible products | Universal |
| Harmonized System (HS) code | 84717070 |
| Power |
|---|
| Power consumption (write) | 3.18 W |
| Power consumption (read) | 2.44 W |
| Power consumption (idle) | 0.52 W |
| Operating voltage | 3.3 V |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -45 - 105 °C |
| Operating relative humidity (H-H) | 5 - 98% |
| ECC | Yes |
| Storage relative humidity (H-H) | 5 - 98% |
| Operating shock | 1500 G |
| Operating vibration | 16 G |
| Maximum operating altitude | 120000 m |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Weight | 7 g |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Screws included | No |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Screws included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£20.94
£17.45 In stock
-
![]()
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
Origin Storage SSD 120GB 3D TLC M.2 80mm
| Hard drive |
|---|
| SSD capacity | 120 GB |
| Memory type | 3D TLC |
| Performance |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Memory type | 3D TLC |
| Hardware encryption | No |
| Data transmission |
|---|
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Design |
|---|
| SSD form factor | M.2 |
| System requirements |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Features |
|---|
| Interface | Serial ATA III |
| NVMe | No |
| Hot-swap | No |
| SSD capacity | 120 GB |
| Windows operating systems supported | Yes |
| Read speed | 1500 MB/s |
| Write speed | 450 MB/s |
| Linux operating systems supported | Yes |
| Memory type | 3D TLC |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Harmonized System (HS) code | 84717070 |
| Operational conditions |
|---|
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Technical details |
|---|
| Interface | Serial ATA III |
| Hot-swap | No |
| Operating temperature (T-T) | 0 - 70 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Hardware encryption | No |
| SSD form factor | M.2 |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Software |
|---|
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions |
|---|
| Package type | Blister |
| Packaging data |
|---|
| Storage drive adapter included | No |
| Package type | Blister |
| Packaging content |
|---|
| Storage drive adapter included | No |
| Logistics data |
|---|
| Harmonized System (HS) code | 84717070 |
£20.94
£17.45 In stock
<
